info@aremco.com  |  +1 (845) 268 0039

PRODUCTS

 

New Corr-Paint™ CP2070 Provides High Temp Corrosion Protection

July 19, 2011

Corr-Paint™ CP2070, a new high temperature corrosion protective, epoxy-novolac coating developed by Aremco Products, Inc., is now used to protect metal components and structures used in aircraft, automotive, chemical processing, foundry, and power generation equipment to 300 °F (150 ºC).

New Corr-Paint™ CP2070 Provides High Temp Corrosion Protection

Corr-Painttm CP2070 is a two part, gray-pigmented, 100% solids, epoxy-novolac system used to protect metal components and structures used in aircraft, automotive, chemical processing, foundry, and power generation plants for applications to 300 oF (150 ºC).

Corr-Painttm CP2070 provides excellent adhesion to marginally prepared metal surfaces and exceptional corrosion resistance. It is resistant to a wide range of chemicals including acetic acid, jet fuel, alcohols, diesel fuel, gasoline, hydrochloric acid, nitric acid, phosphoric acid, potassium chloride, sodium chloride, toluene and xylene. It also provides good thermal shock, salt spray, and UV resistance.

Corr-Painttm CP2070 is a two-part system that is mixed easily in a 2-to-1 ratio by volume. Mixed viscosity is 800-1,000 cP. Coating can be applied using conventional spray equipment, brush or roller. It dries and cured fully at room temperature in 24 hours. Typical film thickness is 5-7 mils for a single coat.

Corr-Painttm CP2070 is part of a series of high temperature coatings for applications from room temperature to 1500 ºF. CP2070 can also be ordered in a variety of special pigments including black, white, green, red, blue, yellow and brown. Products are available from stock in pint, quart, gallon and five-gallon pails.

Please contact Aremco’s Technical Sales Department for additional information.

 

RECENT

ARCHIVES