info@aremco.com  |  +1 (845) 268 0039
 

Corr-Paint™ CP2060 Abrasion Resistant High Temp Coating Now Available

January 10, 2012


Corr-Paint™ CP2060, a new abrasion and corrosion resistant, high temperature coating developed by Aremco Products, Inc., is now used to protect steel components and structures used in demanding industrial applications to 500 °F (260 ºC).

Corr-Paint™ CP2060 Abrasion Resistant High Temp Coating Now Available

Corr-Paint™ CP2060 is a two part, silicon carbide filled, 100% solids, epoxy-novolac, abrasion and corrosion resistant coating used to protect steel components and structures used in aircraft, automotive, chemical processing, foundry, and power generation plants for applications to 500 °F (260 ºC).

Corr-Paint™ CP2060 provides excellent adhesion to marginally prepared metal surfaces and exceptional resistance to a wide range of chemicals including acetic acid, jet fuel, alcohols, diesel fuel, gasoline, hydrochloric acid, nitric acid, phosphoric acid, potassium chloride, sodium chloride, toluene and xylene. It also provides good thermal shock, salt spray, and UV resistance.

Corr-Paint™ CP2060 is a two-part system that is packaged in pre-weighed kits for a 100:8 mix ratio by weight. CP2060 mixes to a thick paste and is applied using a trowel or spatula. It sets and cures fully at room temperature in 24 hours. Typical film thickness is 50 mils for a single coat.

Corr-Paint™ CP2060 is part of a series of high temperature protective coatings for applications from room temperature to 1500 ºF. Products are available from stock in pint, quart, gallon and five-gallon pails.

Please contact Aremco’s Technical Sales Department for more information about this advanced product.