|  +1 (845) 268 0039

Aremco-Bond™ 616 Electrically Conductive Adhesive Now Available

October 19, 2010

Aremco-Bond™ 616, a new silver-filled, low-cost, high temperature, electrically and thermally conductive adhesive developed by Aremco Products, Inc., is now available for electrical and electronic assembly applications to 360 °F (182 °C).

Aremco-Bond™ 616 is an advanced, two-part, electrically and thermally conductive adhesive that is formulated using low-cost silver-coated glass spheres. This system exhibits a volume resistivity of less than 0.005 ohm-cm at room temperature, and a thermal conductivity of 0.4 W/m-°K. The continuous operating temperature range is 360 °F (182 °C) and intermittent use temperature is 400 °F (205 °C). The tensile shear strength is 1,000 psi and Shore D hardness is 78. Mixed viscosity range is 50,000 to 60,000 cP.

Aremco-Bond™ 616 mixes easily in a 1-to-1 ratio by weight. It sets at room temperature in 24 hours or can be heat cured in 2 hours at 200 °F. It comes in pint, quart and gallon kits and can be specially packaged in divided bi-packs upon request. Typical applications for Aremco-Bondtm 556-LV include electrical connectors, lighting and sensors as a replacement for solder.

Please contact Aremco’s Technical Sales Department for more information about this advanced new product.