Aremco-Bond™614 is an advanced, two-part, electrically and thermally conductive adhesive that is formulated using a low-cost nickel flake filler. This system exhibits a volume resistivity of less than 0.025 ohm-cm at room temperature, and a thermal conductivity of 0.5 W/m-°K. The continuous operating temperature range is 360 °F (182 °C) and intermittent use temperature is 400 °F (205 °C). The tensile shear strength is 2,500 psi and Shore D hardness is 78. Mixed viscosity range is 100,000 to 110,000 cP.
Aremco-Bond™ 614 mixes easily in a 1-to-1 ratio by weight. It sets at room temperature in 24 hours or can be heat cured in 2 hours at 100 °F. It comes in pint, quart and gallon kits and can be specially packaged in divided bi-packs upon request. Typical applications include electrical connectors, LEDs and sensors as a replacement for solder.
Please contact Aremco’s Technical Sales Department for more information about this advanced new product.