info@aremco.com  |  +1 (845) 268 0039
 

Aremco-Bond 2330 Silicone-Elastomer High Temp Adhesive Now Available

September 29, 2012


Aremco-Bond™ 2330, a new high temperature, single-part, silicone-elastomer adhesive produced by Aremco Products, Inc., is now used for industrial bonding applications to 570 °F (300 °C).


Aremco-Bond™ 2330 is a single component, heat-curable, red pigmented, high temperature, silicone elastomer adhesive that exhibits excellent flexibility and resistance to thermal shock, chemical corrosion and water immersion. After a brief cure schedule, Aremco-Bond™ 2330 withstands temperatures exceeding 570 °F (300 °C) and provides a tensile shear strength of 425 psi. Its coefficient of thermal expansion is 94 x 10-6 in/in/°F and viscosity at room temperature is 38,000 cP. Electrical properties include a dielectric strength of 550 volts/mil and a volume resistivity of 2.0 x 1015 ohm-cm.

Aremco-Bond™ 2330 is an easy-to-use material that can be spread with a plastic applicator or automatic dispense system. It is typically applied to each substrate to be bonded in thin layers of 10-15 mils. Curing is accomplished easily by heating to 300 ºF for 45 minutes or 400 ºF for 30 minutes.

The flexible nature of Aremco-Bond™ 2330 enables it to bond together a wide range of materials including ceramics, composites, metals, plastics, quartz, and refractories at temperatures to 570 °F. This property provides manufacturers a direct method of attaching materials of different coefficients of expansion for use in thermal, structural and electrical applications throughout industry.

Aremco-Bond™ 2330 is available from stock in pint, quart, and gallon containers. Please contact Aremco’s Sales Engineering Department for more information about this advanced adhesive system.