High Temperature Protective Coatings

Tech Bulletin A6

Aremco’s Corr-Paint™ protective coatings include the most expansive line of high temperature organic- and ceramic-based products available on the market today for applications to 1500 °F.

Corr-Paint™ CP3015-SS
High Temperature Protective Coatings
Product
Features

CORR-PAINT™ CP20XX-SERIES


These epoxy and urethane based coatings are used for producing corrosion and wear resistant barriers to 500 °F. Typical applications include tanks, pipelines, boilers, precipitators, scrubbers, bag houses, cyclones, hoppers and other process equipment used in the power, pulp and paper, and chemical processing industries.

CP2000
Jet black, one-part, urethane coating for oxidation and wear protection to 400 °F.

CP2010
Aluminum, one-part, urethane coating for oxidation and wear protection to 400 °F.

CP2020
Grey, one-part, urethane coating for oxidation and wear protection to 400 °F.

CP2050-LF
Epoxy-phenolic, high-build coating filled with long glass reinforcement fibers, 400 °F.

CP2050-FF
Epoxy-phenolic, high-build coating filled with fine glass reinforcement fibers, 400 °F.

CP2050-NF
Epoxy-phenolic, unfilled coating for aggressive acidic conditions, 400 °F.

CP2060
Epoxy-Novolac, high-build, silicon carbide filled coating for corrosion and wear protection, 500 °F.

CP2070
Epoxy-Novolac, low viscosity, grey-pigmented coating, 300 °F.

CORR-PAINT™ CP30XX-SERIES


These ceramic-inorganic, aqueous-based coatings are used for corrosion and oxidation protection of steel and refractory products used in boilers, furnaces, kilns, rotary calciners, stacks, and other high temperature structures to 1500 °F.

CP3000
Ceramic filled coating to 1300 °F.

CP3015-AL
Aluminum-ceramic filled coating to 1200 °F.

CP3015-BL
High emissivity, inorganic, black-pigmented coating to 1500 °F.

CP3015-GR
Grey-ceramic inorganic coating to 1400 °F.

CP3015-SS
Stainless steel filled, inorganic coating to 1400 °F.

CP3015-WH
White-ceramic inorganic coating to 1500 °F.

CORR-PAINT™ CP40XX-SERIES


These silicone-based, heat-resistant coatings are formulated to adhere to ceramics, metals, refractories, and quartz, and provide exceptional resistance to outdoor weathering, salt-spray corrosion, and thermal cycling to 1100 °F. Two variations of each color are offered, one formulated with a VOC-compliant, water-dispersible silicone emulsion; the other with a solvent-based silicone resin.
A “-S” is added to the part number to designate solvent-based silicone resin.

CP4000 / CP4000-S / CP4000-S1
Black

CP4010 / CP4010-S / CP4010-S1
Aluminum

CP4020 / CP4020-S / CP4020-S1
Gray

CP4040 / CP4040-S / CP4040-S1
White

CP4050 / CP4050-S / CP4050-S1
Green
 
CP4060 / CP4060-S / CP4060-S1
Red

CP4070 / CP4070-S / CP4070-S1
Blue

CP4080 / CP4080-S / CP4080-S1
Yellow

CP4090 / CP4090-S / CP4090-S1
Brown

CP4095 / CP4095-S / CP4095-S1
Orange
 

CORR-PAINT™ CP5000


This is a two-part, water-based, inorganic, zinc-rich primer that provides excellent abrasion and salt-spray resistance. It is compatible with CP40xx-Series coatings and is used for priming steel structures in the marine, power, and chemical process industries.



CORR-PREP™ CPR2000


This is a specially formulated, water-based, zinc phosphate etchant that is non-toxic, non-flammable, non-caustic, and non-corrosive, and significantly improves coating adhesion to aluminum, galvanized, steel, and stainless steel metals, and improves long-term corrosion protection.

Corr-Paint, Corr-Prep